I believe everyone has bought a ring. Nowadays, most rings are of the live-mouth type. If you don’t believe me, you can take a look at the ring on your hand. In daily life, it often happens that the ring is scratched by something, and it will be scratched suddenly, causing the ring to be deformed and unsightly. If you go to a gold jewelry store for this trivial matter, the time cost is also very high.

   Many years ago, thin red wire was used to wrap around the ring interface, which was cumbersome to operate and ugly. As a heat shrink tube manufacturer, we do not allow such things to happen. Yes, it is a ring heat shrink tube. It can be put on the ring interface to make the gap disappear, so that other things will not be scratched and scratches will be avoided. , the ring is deformed.

   Ring heat shrink tubing is usually clear heat shrink tubing. Heat shrinkable tube specifications generally use φ2.0mm and 3.0mm. Because the transparent heat shrink tube is transparent and invisible, it will not affect the appearance of the ring; because the transparent heat shrink tube is H-shaped, it is an environmentally friendly material and is very soft and comfortable. Prolonged skin contact will not cause adverse reactions or allergies. Most gold jewelry stores now adopt this method. How to use ring heat shrink tubing correctly? The editor at Duwai had no choice but to take out the ring I bought from a roadside stall yesterday to take a closer look. Utilize the efficient shrinkage of heat shrink tubing to secure and protect open loops.

1. Adjust the ring to the size that suits your finger. Take out the transparent heat shrink tube and slowly insert it through the gap between the live rings until the two holes can be completely covered. Then cut it off and remove the heat shrink tube. Put the tube completely in, wrap both sides, and adjust the position.

2. Take out the heat gun and adjust the temperature to 100°C. Since the transparent heat shrink tube is very soft, the shrinkage temperature is lower than that of heat shrink tubes of other colors. Aim at the heat shrink tube and heat it until it shrinks completely. It needs to be evenly shrunk. No wrinkles.

To make it simple, just take out the lighter from your pocket. The flame needs to be 4-5mm away from the heat shrink tube, for example, and then move it back and forth until it is completely shrunk.

It can also be soaked in boiling water at 100 degrees Celsius to achieve a comprehensive shrinkage effect. Allow it to shrink and fit snugly into the ring to secure and protect it.

   This method can effectively protect the ring from opening, enlarging, deforming and falling off the finger during work. You no longer have to worry about moving things to scratch the ring, and you no longer have to pinch your hair when stroking your hair. A small heat shrink tube can completely say goodbye to the pain of pinching your hair. It is worth having. This kind of heat shrinkable tube is a common heat shrinkable tube in major gold jewelry stores.