DUWAI ADW - Heat Shrinkable Tubing for Fiber Optic Splice Closure
APPLICATIONS
It's a heavy wall heat shrinkable tubing with inner spiral polyamide hot melt adhesive coated. The outer heavy wall can provide reliable external protection, and high-performance hot melt adhesive can provide dependable waterproof performance and prevents leakage of the gas inside the closure.
OPERATING TEMPERATURE RANGE
- Continuous operating temperature: -55℃ ~ 110℃
- Minimum shrink temperature: 80℃
- Full recovery temperature: Above 120˚C
- Discoloration temperature of temperature sensitive paint: 230˚C
COLOR
Standard color: black, (Special sizes are available on request.)
- Shrink ratio: 3:1
- UV and water resistance
- Corrosion resistance
- Polyamide hot melt adhesive prevents leakage of the gas inside the closure
- The special internal single-end non-adhesive glue applying method can exactly fix the cable on the position
- Mechanical damage resistance
- The outer temperature sensitive paint is convenient for the instruction of heat shrink operation
Disagreement folder
Hot melt glue block
|
Technical Data |
|
|
|
|
Property |
Specification Requirement |
Test Method |
Typical Value |
|
Tensile strength |
≥10.3MPa |
ASTM D2671 |
≥14 MPa |
|
Elongation at break |
≥200% |
ASTM D2671 |
≥400％ |
|
Elongation at break after aging |
≥100% |
ASTM D2671 (150℃, 168hrs) |
≥300％ |
|
Dielectric strength |
≥19.7KV/mm |
ASTM D2671 |
≥20KV/mm |
|
Volume resistivity |
≥1014Ω•cm |
ASTM D2671 |
≥1014Ω•cm |
|
Copper corrosion |
No corrosion |
ASTM D2671 |
No corrosion |
|
Specification |
|
|
|
|
|
Part Number |
As supplied |
After recovered |
Standard Length |
|
|
I.D. (min) |
I.D. |
W.T. |
||
|
ADW033 |
33 |
8 |
3.2 |
200 |
|
ADW038 |
38 |
10.2 |
3.2 |
200 |
|
ADW040 |
40 |
12 |
4.1 |
200 |
|
ADW045 |
45 |
12 |
4.1 |
200 |
|
ADW075 |
75 |
22 |
4.1 |
200 |
|
ADW085 |
85 |
25 |
4.3 |
200 |
|
ADW105 |
105 |
30 |
4.3 |
200 |
