DUWAI HS4X 4:1 Heat-Shrink Tubing for Cable Protection Environmental Double-Wall Design with Hot Melt Adhesive Lining for Comprehensive Defense, 4:1 Shrink Ratio - Reliable Solution for Enhanced Cable Safety
HS3X&HS4X (3:1, 4:1) halogen-free environment-friendly double-wall pipe is composed of soft polyolefin and hotmelt adhesive double layer, the outer polyolefin insulation material, the inner layer of hot melt adhesive can buffermechanical strain and strong sealing. The main function of the product is sealed waterproof, anti-corrosion, antieakage and insulation protection, high rate shrinkage characteristics can meet the protection of more variablediameter components. Mainly used in all kinds of wire harnesses, Marine wires and cables and metal pipes need to besealed waterproof, moisture-proof and corrosion-proof sealing insulation, binding and fixing fields.
Product overview
| Performance | Experimental methods | Index |
| Tensile strength (MPa) | ASTM D 2671 | ≥10.4 |
| Elongation at break(%) | ASTM D 2671 | ≥200 |
| Tensile strength after aging (Mpa) | 158℃×168h | ≥7.3 |
| Elongation at break after aging (%) | 158C×168h | ≥100 |
| Axial rate of change (%) | ASTM D 2671 | -8~+8 |
| Breakdown strength (kV/mm) | lEC 60243 | ≥15 |
| Volume resistivity(Q/cm) | IEC 60093 | ≥10¹⁴ |
Hot melt adhesive specifications
| Performance | Experimental methods | Index |
| Softening point (℃) | ASTM E 28 | 95±5 |
| Water absorption (%) | ASTM D 570 | <0.2 |
| Peel strength (PE)(N/25mm) | ASTM D 1000 | ≥120 |
| Peel strength (A1)(N/25mm) | ASTM D 1000 | ≥80 |
Product features
| Heat shrinkage ratio:4:1 | High rate shrinkage,UV resistance |
| Initial shrinkage temperature:≥+70℃ | Environmental standard:RoHS |
| Full shrinkage temperature:≥+125℃ | Standard color:Black(tenstandard colors are available) |
| Operating temperature:-45C~+125℃ |
Product specifications
| Specification | Supplied inner diameter (mm) | Complete contraction (mm) | Standard packaging M/plate、M/root | |||
| Inch | mm | Inner diameter | Total wall thickness | The adhesive layer has a thick wall | ||
| 2/13 | 4.0 | ≥4.0 | ≤1.0 | 1.05±0.30 | 0.50±0.30 | 200 |
| 1/4 | 6.0 | ≥6.0 | ≤1.5 | 1.15±0.30 | 0.50±0.30 | 100 |
| 5/16 | 8.0 | ≥8.0 | ≤2.0 | 1.15±0.30 | 0.60±0.30 | 100 |
| 1/2 | 12.0 | ≥12.0 | ≤3.0 | 1.75±0.30 | 0.60±0.30 | 1.22 |
| 5/8 | 16.0 | ≥16.0 | ≤4.0 | 200±030 | 0.70±0.30 | 1.22 |
| 15/19 | 20.0 | ≥20.0 | ≤5.0 | 2.30±0.40 | 0.70±0.30 | 1.22 |
| 1 | 24.0 | ≥24.0 | ≤6.0 | 2.60±0.40 | 0.75±0.30 | 1.22 |
| 1-1/4 | 32.0 | ≥32.0 | ≤8.0 | 3.00±0.50 | 0.90±0.30 | 1.22 |
| 2 | 52.0 | ≥52.0 | ≤13.0 | 3.35±0.50 | 0.95±0.30 | 1.22 |
